	EXring
	"Live Free or Die"	Secure Online Ordering

EXring® System

The EXring® installed on a ESpring® Extractor spring.

EXring® system
close up.

Recent military trials were conducted to seek improvements on the current issue M4 carbine. Failure to extract was one of the main deficiencies that needed to be addressed. With the help of a research and development company Olympic Arms has basically solved the failure to extract issue.

The solution is a combination of an extractor spring made from a recently declassified aerospace material that will not fail under heat and pressure, and what has become known as the EXring® buffer.

EXring® and EEspring® installed on extractor.

The EXring® is a polymer ring that goes around the extractor spring, replacing the standard blue extractor spring buffer.

The EXring® is made exclusively for Olympic Arms and is an inexpensive solution to most extraction problems. Simply place the EXring® around your extractor spring (above left), reinstall the extractor spring into the extractor . It's that simple. Using the EXring® will add tension and much needed support to the extractor and extractor spring assisting in the proper and fully reliable extraction of spent cases.

Part #: EXring®

Price: $1.49 each
5 for $7.00

A Top view of the EXring® system installed.

Here you can clearly see where the "X" portion of the name came from. The profile of the poly ring is actually "X" shaped.

[ Home ] [ Up ]

Send mail to Webmaster@TripleBreakProducts.com with questions or comments about this web site.
Copyright © 2007 Triple Break Products, All right reserved. Information in this document is subject to change without notice.
Last modified: March 21, 2007